Factory Direct Sale High Quality Bolt Machine
Factory Direct Sales High Quality Bolt Machine
Innovations In The Four-bolt Full-threaded Machine :
1. High-efficiency energy-saving four anchor rod forming machine (hereinafter referred to as anchor rod machine) structure; creel parts, dipping parts, winding parts, drying parts, traction parts, automatic cutting machine parts, electrical control parts.
2. The structure of the winding machine; consists of a stepless speed regulating motor, a tensioning wheel component, a coil component, a winding component, a winding component seat, a chain, a bearing, and the like. The winding machine performs the winding process excellently.
3. Drying parts; the drying box is made of double-layered insulation cotton to make the insulation effect very good.
4. Automatic cutting machine parts; equipped with automatic cutting machine device, which can cut according to the set length.
The Advantages Of The Bolt Machine Are As Follows :
1. Energy saving; the winding machine uses 1KW motor to drive 4 winding assemblies. The total supporting power of the bolt forming equipment is 25KW, and the power consumption per meter of finished bolt is 0.05-0.06 degrees. I can definitely say that domestic bolt equipment is the first to save energy.
The winding assembly of other manufacturers is 2.2KW electric, the machine drives one or two winding parts, and the total power of the bolt forming equipment is 32KW, which is a serious waste of energy.
2. High production efficiency; the production efficiency of the winding machine is 1-3 times that of the domestic winding machine. The daily production capacity is 4,000 meters. Bolts with a diameter of 12 mm or less, about 6,000 meters per day. It is the first in China.
3. The product quality is high; the tensile strength of the glass fiber resin anchor produced by the o-phenyl unsaturated polyester resin is comparable to the tensile strength of the carbon steel (same diameter).
4. Four winding assemblies are used to simultaneously produce four full-threaded anchors of the same diameter, same length and same pitch. By collecting data, there is no equipment for producing four anchors at home and abroad. High energy efficiency. It is the first in China.
5. Innovative points of mold parts: The mold parts are composed of parts such as molds and mold bodies. The mold consists of main hole and side hole. The mold can strictly control the ratio of resin to yarn. The ratio of resin to yarn determines the bearing capacity of the rod. The side yarn is wound to form a curved thread to ensure that the rod is threaded within the tensile strength range. Not damaged. The quality of the product is determined by the ratio of the yarn to the yarn. High-strength rods can be produced with o-phenyl unsaturated polyester resin. Read the report of “BanBiao National Testing Center, according to the requirements of “MT/T1061.” This is the result of high-quality mold parts innovation.
6. The innovation of the winding assembly, the winding assembly is a rotating body, which is composed of a wire wheel component, a crimping component, a wire rod, a sprocket, a bearing and the like. At the beginning of winding, the wire passes through three pressing members, and the pressure of each pressing member can cause the wire to generate a tension of 1-100 N, and then the three pressing members can generate a tension of 3-300 N for the wire. It has been proved by experiments that the thread depth of the wire rope is 235N, and the thread depth is 1.65 mm. The thread shape has a direct influence on the mechanical properties of the rod body. The tensile strength according to the MT/T1061 standard is ≥300 MPa. The measured average value is 510 MPa. It fully meets the requirements of thread depth. The tension of the cord is selected to be the most suitable for 300N. The test results prove. The structure design is very reasonable.
The Difficulty Of Innovation :
efficiency is doubled → energy consumption is reduced by 1 time → quality is increased by 30% is relatively difficult. It has also passed several years of research.
The Technical Route :
overall design → component design → part design → parts processing → component installation → total installation → commissioning → trial production → improvement → trial production → improvement → trial production → small production → improvement → equipment packaging.
1 to 2 times energy saving, 1 to 3 times higher production efficiency, 30% higher quality.
Our Company :
Xinxiang Jinglong Composite Materials Co., Ltd. was founded in 1995. It is a company dedicated to R&D, design and processing of FRP pultrusion molds, molded dies and pultruded profiles. The company covers an area of more than 5,000 square meters, and has more than 30 sets of various machine tools, large-scale CNC machining centers, high-precision grinding machines, etc., as well as perfect testing equipment. It is a high-tech environmental protection enterprise specializing in R&D, production, sales and service of FRP.
Since its establishment, the company has made continuous breakthroughs in FRP mold manufacturing and FRP profile processing. In 1995, the company was established, and the company successfully developed a complete design plan for FRP pultrusion molds and obtained mass production. In 2005, it was an excellent supplier of phenolic pultrusion and epoxy pultrusion, and vinyl pultrusion in mold design and mold material application. In 2014, he participated in the design and development of FRP anode tube pultrusion molds and mass production. In 2015, we developed polyurethane pultrusion molds and made breakthroughs in window materials, bridges, etc., and we have deep cooperation with many companies in polyurethane pultrusion molds and processes. For more than 20 years, Jinglong has been committed to the research and innovation of FRP molds, promoted and witnessed the development of composite materials in China, and has become a professional supplier with unique advantages in this field.
At present, the company has dozens of profiles for the market, including the production of FRP pultruded profiles, FRP ladders / stools, grilles, FRP fences, FRP bolts and other products. The company has a high-quality talent team, professional production and technical personnel, professional marketing team, quality pre-sales and after-sales service team. Under the comprehensive advantages of self-owned talents and technology, the products produced are stable in performance and reliable in quality. At the same time, they are highly praised by consumers for their enthusiastic service. Xinxiang Jinglong Composite Materials Co., Ltd. is a company integrating product development, design, production, sales and installation. Our company is willing to cooperate with Chinese and foreign friends to create brilliance with advanced technology, high-quality products, reasonable price and perfect service.
Packaging & Shipping :
Packing Details : Bulk，Carton box，wooden pallet，steel pallet or as per customers’ requirements.
Delivery Details : 5-30days
Transportation : By sea, by air,by train and by express delivery.
Payment : L/C,T/T（>>30% deposit when confirm order, pay the balance before shipment.）Western Union, Paypal
Port : Shanghai/Tianjin/Qingdao